ECON G Series General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

ECON G Series General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

The ECON G series servo drives are high performance brushless AC servo drives. Powering 100W to 3.8KW servo motor, these servo drives offer high precision, excellent position following capability to make your motion control systems faster and more precise.If you require for CANopen and MODBUS,our G series cover this demand too.Also,with its small and light size,save your mechanical space and shipping cost

Product Details

Product Introduction: General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

 servo 拷贝.jpgECON G series servo system(servo drive and servo motor) use the new digital signal processor (DSP) and intelligent power module (IPM), advanced optimization control algorithm can achieve precise control of torque, speed and position, supports CANopen, standard Modbus communication protocol, the servo motor power range is  0.1 kW ~ 3.8kW.

Technical Parameter: General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

l  Power range: 0.1kW ~ 3.8kW

l  Input voltage: single phase or three phase 220VAC (-15~+10%), 50~60HZ

l  Control mode: position control, speed control, torque control

l  Encoder type: 2500 linear incremental optical encoder (provincial line / non provincial line), 1024 wire rotary encoder

l  Communication mode: RS485, RS232, CANopen, standard MODBUS communication protocol

l  Input and output points: IO can be programmed to support the positive and negative logic settings, 8 input supports 16 kinds of functions can be carried out every function of the function of positioning, 4 output support for 10 kinds of functions which can be carried out in 1 ways

l  Operation and display: 5 digital tube, 5 keys, or hand-held operation panel

l  Monitoring function: to provide position, speed, current, voltage, input and output, and so on up to 30 kinds of state monitoring

Features:General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

l  Using a new digital signal processor (DSP) and intelligent power module (IPM), advanced control algorithm, to achieve high precision control of permanent magnet synchronous motor

l  The combination of intelligent PID control algorithm and PDFF controller improves the rapidity and accuracy of position and speed control.

l  The notch filter can be used to improve the following performance, reduce the noise and reduce the loss of the machine.

l The output signal of the encoder is supported at any frequency dividing ratio, which is more accurate.

l  Support load disturbance observer, can carry forward torque and forward compensation, improve dynamic response of the system

l  6 Inertia identification and automatic gain function simplify the debugging process of the system.

l  Fan switch temperature can be set, according to the site needs to open air cooling, to provide environmental protection and more cost-effective application

l  Support debugging software, mechanical characteristics analysis, parameter setting, monitoring and other functions, easy to operate

l  The configuration of the hand held operator panel, parameter settings and system debugging is more convenient and quick


Model

ECN-GA3202

ECN-GA3204/

GA3207

ECN-GA3210/

GA3215B

ECN-GA3215BF

ECN-GA3220B

ECN-GA3230B

Rated Output Power

100W-200W

400W-750W

1KW-1.5KW

1.5KW-2.3KW

2.3KW-3.0KW

3.0KW-3.8KW

Input power

Three-phase AC220V( -15% to +10%),   50-60HZ / single-phase AC220V (-15% to +10%), 50-60HZ

Encoder Specification

Incremental Encoder (2500ppr, 5V)

Control Mode

1.       Position   Control Mode 2, Pulse Speed Control Mode 3, CAN Control Mode4, 485 Control   Mode 5 and 232 Control Mode

2.       1.   Position Control Mode 2, Speed Control Mode 3, CAN Control Mode4, 485 Control   Mode 5 and 232 Control Mode

Regenerative Brake

External

Internal or External

Internal   or External

Control   Characteristics

Speed Frequency Response

≥200HZ

Speed fluctuation rate:

±3%   (Load fluctuation  0-100%); ±2%   (power -15% to +10%) (at Rated Speed)

Speed ratio

1:5000

Pulse frequency

≤500KHz

Position   control

Input mode

    Pulse + direction ② CW pulse +   CCW pulse    ③ A/B quadrature pulse

Electronic gear ratior

Setting Range: 1-99991-9999

Feedback pulse

Adjustable according to the number of   encoder wires

Feedback Type

Feedback from incremental pulse   encoder on motor shaft

Parameter Setting Type

Button on Driver or From the PC

Applicable load inertia

Less than 3 times of the motor inertia

Regenerative Brake Type

Resistance Consumption Brake

Installation Type

Wall-mounting Installation

Grounding Type

Shell grounding: grounding Resistance   ≤0.1Ω

Monitoring functions

Rotation speed, current position,   command pulse accumulation,  positional   deviation, motor current, command pulse frequency, operating status, input   and output terminal signal

Protection functions

Over-speed, main power supply   overvoltage / undervoltage, overcurrent, overload, braking abnormity, encoder   abnormity, position-tolerance

Display and Operation

5-digit LED display panel with 4 keys

Working environment

Temperature

Operation temperature: 0-55   / Storage temperature: -20 to   80

Humidity

Less than 90% (no condensation)

<90%(Non-condensing)

Vibration

<0.5G(4.9m∕S²) ,   10-60HZ(Non-continuous Operation)

Service:General AC Servo drive can be used with AC servo motor range from 100W~3.8KW


ECON provide technical service from the start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.

Payment And Delivery:General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

ECON supports T/T,Paypal,Western Union to make payment. We can arrange EXPRESS,AIR and SEA shipment,we have professional team to deal with logistic.

Recommendations:General AC Servo drive can be used with AC servo motor range from 100W~3.8KW

AC Servo Motor Range from 0.1Kw~3.8Kw

G2 AC Servo Drive Supports Canopen That Makes Fun With Servo System




Equipped with professional AC Servo Drive factory, It is a leading econ g series general ac servo drive can be used with ac servo motor range from 100w~3.8kw manufacturer and supplier.

Previous:AC Servo Motor in 130mm Flange widely used with servo drive Next:AC Servo Motor nema42 use with AC servo drive

Inquiry