ModBus RS485 Integrated 200W BLDC Servo Motor Drive

ModBus RS485 Integrated 200W BLDC Servo Motor Drive

NEMA23 Integrated dc brushless servo motor drive, brushless dc servo motor drive

Product Details

Product Overall:ModBus RS485 integrated 200W BLDC Servo Motor Drive


IV57-485-XX series integrated brushless servo motor is an ECON technology’s latest brushless servo motor which supports RS485 modbus communication.It adopts the latest 32-bit DSP digital processing technology, the advanced vector control technology drive the motor with low heating ,low noise and extra smoothly. That offer a very good performance for the different of applications.its compact size can save much space for installation ,and enhance the anti-interference ability.The standard RS485 Modbus communication can support hundred of motor working at the same time ,which is a very competitive solution for many kinds of applications


Highlight FeaturesModBus RS485 integrated 200W BLDC Servo Motor Drive

²  Latest 32bit DSP Technology

²  The power input is 15VDC—50VDC,the recommended input is 36VDC

²  The continuous current output is 8A,the peak current is 24A(advanced over-load tolerant)

²  It supports pulse/speed /torque control mode

²  Adopt advanced vector control technology

²  Standard RS485 Modbus communication

²  The supported max baudrate is 100KHZ.

²  Smooth movement and extra low noise ,quick response, no delay and zero settling time

²  No loss of steps; no hunting; no overshooting


Product Applications: ModBus RS485 integrated 200W BLDC Servo Motor Drive

For a variety of small and medium-sized automation equipment and instruments, such as: AGV, speed pass door, engraving machine, marking machine, cutting machine, laser Phototypesetting, router machine, plotter, CNC machine tools, automatic assembly equipment,vending machine. The users can get special effect from small noise, high speed equipment application.


Product Parameters: ModBus RS485 integrated 200W BLDC Servo Motor Drive


Motor Specification


Definition


Model                

 

Poles

 

Torque(N.M)

 

Power(W)

Integrated brushless servo   motor

IV57-485-10 

6

0.31N.M

100W

IV57-485-14

6

0.44

140W

IV57-485-18

6

0.63

200W


Electrical Specifications

Description

IV57-485-XX

     Min

Typical

Max

Unit

Output Current(peak)

0.1

-

8.0

A

Input   VoltageDC

15

36

50

VDC

Control   Signal Input Current

6

10

16

mA

Control   Signal Voltage

4.5

5

28

Vdc

Communication   baud rate

10

38.4-

100

KHZ

Pulse width   of high level

1.5

-

-

uS

Position   accuracy

-

±1

-

pulse

Speed accuracy


±2


rpm

The max   ACC(without load)

-

100

-

rpm   /ms

Insulation   Resistance

100





Product Connection: ModBus RS485 integrated 200W BLDC Servo Motor Drive


The IV57-485-18 has 2 connectors:connector for control signal connections,connector for power and motor connection.


 Control signals connector

Pin Function

Details

PUL+

INEFFECTIVE DUE TO COMMUNICATION WITH RS485   Modbus

PUL-

DIR+

DIR-

ENA+

Enable signal: This   signal is used for enabling/disabling the Drive. High level (NPN control   signal, PNP and Differential control signals are on the contrary, namely Low   level for enabling.) for enabling the Drive and low level for disabling the   Drive. Usually left UNCONNECTED (ENABLED)

ENA-

ALM+

OC   single -end output, the pull on voltage is 5-24vdc,and the max output current   is 100MA

ALM-

T+

RS485 communication port

T-


Control signal timing diagram.

 

 1.png

 

Power and Motor

Pin

Definition

Description

1

+VDC

15-50VDC,36VDC   is recommended, leaving rooms for voltage fluctuation and back-EMF.

2

GND

Power supply voltage between the provisions of the normal work, IV57-485-XXmotors best to use non-regulated DC power supply,can also use the transformer step-down + bridge rectifier + capacitor filter. However, take care that the peak value of the rectified voltage ripple does not exceed its maximum specified voltage. It is recommended that users use DC voltage lower than the maximum voltage to supply power and avoid the fluctuation of power grid beyond the working range of driver voltage.

If you are using a regulated switching power supply, be aware that the output current range of the switching power supply needs to be maximized.


Product Dimension: ModBus RS485 integrated 200W BLDC Servo Motor Drive


     IV57 dimension.png 


Model

Motor body length

unitmm

Drive length

unitmm

The Total length

unitmm

IV57-485-09

76

30.2

106.2

IV57-485-13

96

30.2

126.2

IV57-485-18

116

30.2

146.2

※Recommend side installation, better cooling effect, when design installation dimension, consider the terminal size and wiring!




                                                                                                                                                                                                                                

Previous: Next:BLDC Servo Drive With CANopen Communication

Inquiry